Nastavenie zdieľania vo Windows 7

Sharing according to this guideline are tested on Windows 7 Professional 64 bit.

I suggest you set the name of the pc and the Working Group according to this guideline

1. Configuring the type of network 
2. Turn on sharing 
3. Configuring the Firewall 

Setting the type of network

The first time you connect to a new network, Windows 7 will ask you what type of network it is (Public or Private), according to this choice will be later applied different rules for the network. I recommend you set the Start -> Control Panel -> Network and Internet -> Network and Sharing Center first network name, click the icon as shown:

Instead of the original name we write Ynet and click on OK.

Continue by clicking the network type (in screeshots it is Work network).

Select Work network or Home network eventually

Now we have configured the network type.

Turn on sharing

Start -> Control Panel -> Network and Internet -> Network and Sharing Center -> Advanced sharing settings

Click on the Home or Work

Make sure that you have these settings:

 Network discovery: Turn on network discovery

• File and printer sharing: Turn on file and printer sharing
• Public folder sharing: Turn off Public folder sharing
• File sharing connections: Use 128-bit encryption to help protect file sharing connections
• Password protected sharing: Turn off password protected sharing
• HomeGroup connections: Alow Windows to manage homegroup connections

Sharing you are allowed, now You just need to configure the firewall.

Configuring the  Firewall

This guide is for the windows firewall.

Start -> Control Panel -> System and Security -> Windows Firewall

Select Advanced settings

Here select Inbound Rules and sort rules according to the profile for easy orientation.

In the list of rules looking for group - File and Printer Sharing. Make sure that You have enabled the same rules as in the picture. These are rules File and Printer Sharing which have Private profile. Enabled rules have a green icon, disabled gray. To enable the rule,make the right-click on the rule and in the menu select Enable Rule.

Last step in firewall configuring is for each rule do this: Right click on the rule -> Properties

In General tab select

• Allow the connection

In the Scope tab select

• Local IP address: Any IP address
• Remote IP address: Any IP address

Here You can set permissions for sharing, if you want the folder accessible to everyone, type Everyone and set the required rights (read / write to read and write to the folder and files, or read to read only)